How to use execute method of org.openqa.selenium.grid.sessionqueue.NewSessionQueue class

Check the below links:

• Implicit Wait - It instructs the web driver to wait for some time by poll the DOM. Once you declared implicit wait it will be available for the entire life of web driver instance. By default the value will be 0. If you set a longer default, then the behavior will poll the DOM on a periodic basis depending on the browser/driver implementation.

• Explicit Wait + ExpectedConditions - It is the custom one. It will be used if we want the execution to wait for some time until some condition achieved.

I finally figured it out for anyone else who happens to run into this problem, this is how I got the jar file to be created and run successfully...

I had to change my pom.xml file to the following:

<groupId>TestAutomation</groupId>
<artifactId>TestAutomation</artifactId>
<packaging>jar</packaging>
<version>1.0-SNAPSHOT</version>
<url>http://maven.apache.org</url>

<build>
    <plugins>
        <plugin>
            <groupId>org.apache.maven.plugins</groupId>
            <artifactId>maven-compiler-plugin</artifactId>
        </plugin>
        <plugin>
            <groupId>org.apache.maven.plugins</groupId>
            <artifactId>maven-jar-plugin</artifactId>
            <configuration>
                <archive>
                    <manifest>
                        <addClasspath>true</addClasspath>
                        <mainClass>com.test.automation.Executable</mainClass>
                    </manifest>
                </archive>
            </configuration>
        </plugin>
        <plugin>
            <groupId>org.apache.maven.plugins</groupId>
            <artifactId>maven-surefire-plugin</artifactId>
        </plugin>
    </plugins>
</build>
<dependencies>
    <dependency>
        <groupId>org.seleniumhq.selenium</groupId>
        <artifactId>selenium-java</artifactId>
        <version>2.40.0</version>
    </dependency>
    <dependency>
        <groupId>junit</groupId>
        <artifactId>junit</artifactId>
        <version>4.11</version>
        <scope>test</scope>
    </dependency>
    <dependency>
        <groupId>org.testng</groupId>
        <artifactId>testng</artifactId>
        <version>6.1.1</version>
        <scope>test</scope>
    </dependency>
</dependencies>

Then, I had to adjust my main method to not use any TestNG-related calls. For example, I could not use something like this for my main method:

    TestListenerAdapter tla = new TestListenerAdapter();
    TestNG testng = new TestNG();
    testng.setTestClasses(new Class[] {WordProfFonts2Set0.class});
    testng.addListener(tla);
    testng.run();

Finally, here are the steps to get the appropriate jar file created:

1. Select File > Project Structure... from the top menu
2. Select "Artifact" on the left menu and click the '+'
3. Select Jar > From modules with dependencies...
4. Select your main class using the browse button
5. Click the radio button next to, "extract to the target jar" and click "OK"
6. Click the '+' then select "Module Test Output"
7. In the Available Elements pane to the right, expand the project name and select all the Maven files, then move them to the jar directory being created in the left pane
8. Click "OK"
9. Select Build > Build Artifacts... from the top menu
10. Hover over the jar created and click "Build" under Actions

Notes:

1. Be sure to add the IE or Chrome driver to your projects resources folder, and call it via the code folder, rather than the computer's hard drive. For example, do this:

   File file = new File("src\test\resources\binaries\IEDriverServer.exe");

Not this:

File file = new File
("C:\\Users\\<Username>\\<Proj Name>\\src\\test\\java\\src\\
  test\\resources\\binaries\\IEDriverServer.exe");

Then create the same directory with the driver in it in the same folder your jar is saved to on your computer:

src
TestAutomation.jar

2 . Be sure, if using IE, that Protected Mode is set for either all zones or none of them (in IE, go to Internet Options... > Security (tab) > Enable Protected Mode check box)

Create you driver instance with chrome options as follows:

ChromeOptions cChromeOptions = new ChromeOptions();   
cChromeOptions.addArguments("--test-type");
WebDriver _driver=new ChromeDriver("path_to_your_Chrom_Driver", cChromeOptions);

Yes, it's possible

driver.manage().deleteAllCookies();

Call it right after you are creating the new WebDriver instance.

WebDriver driver = new ChromeDriver();
driver.manage().deleteAllCookies();

You can also delete the cookies one by one

Set<Cookie> allCookies = driver.manage().getCookies();
for (Cookie cookie : allCookies) {
    driver.manage().deleteCookieNamed(cookie.getName());
}

You can use JavaScriptExecutor for scrolling.

Scroll Down

((JavascriptExecutor)driver).executeScript("window.scrollTo(0,document.body.scr‌​ollHeight);");

Scroll Up

((JavascriptExecutor)driver).executeScript("window.scrollTo(0,0);");

Are you executing the java code using a build runner?

If so, then you should be able to pass %system.teamcity.build.id% to the runner, and make it available to your code.

i.e. If you're using the command line runner

java -Dbuild_id=%system.teamcity.build.id%

which you can then access as system arguments

Or if you're using gradle, you can do something like

if (project.hasProperty("teamcity")) {
    version = project.teamcity["teamcity.build.id"]
}

and pass 'version' to the java command line.

In maven, you can just access it using:

${teamcity.build.id}

in your pom.xml

(I could do with a little more info about how you're running java to answer this specifically)

Chances are this problem is caused by an already-running instance of the Selenium server. The new instance needs to listen on the same port number, but can't, because the port is already in use.

Let's say your Selenium server is configured to start on port 4444. Determine if the port is in use using the 'netstat' command:

On Windows: netstat -an | find "4444"

Expect to see output like this:

  TCP    0.0.0.0:4444           0.0.0.0:0              LISTENING
  TCP    [::]:4444              [::]:0                 LISTENING

On Linux, use: netstat -anp | grep 4444

(No Linux box to hand, so can't show example output!)

If you see any output, you need to kill the process that's listening on the port that Selenium wants to use. On Windows, use netstat -anb to find the process name (it'll be listed after the line specifying the port number). Kill it using the Task Manager. On Linux, the process PID and name will be listed by the command above - kill it using kill <PID>.

Try this:

 driver.manage().timeouts().implicitlyWait(30, TimeUnit.SECONDS);

Just the other day i've answered something similar to this so it's still fresh. The reason your code is failing is if the alert is not shown by the time the code is processed it will mostly fail.

Thankfully, the guys from Selenium WebDriver have a wait already implemented for it. For your code is as simple as doing this:

String alertText = "";
WebDriverWait wait = new WebDriverWait(driver, 5);
// This will wait for a maximum of 5 seconds, everytime wait is used

driver.findElement(By.xpath("//button[text() = \"Edit\"]")).click();//causes page to alert() something

wait.until(ExpectedConditions.alertIsPresent());
// Before you try to switch to the so given alert, he needs to be present.

Alert alert = driver.switchTo().alert();
alertText = alert.getText();
alert.accept();

return alertText;

You can find all the API from ExpectedConditions here, and if you want the code behind this method here.

This code also solves the problem because you can't return alert.getText() after closing the alert, so i store in a variable for you.