How to use should_show_right_actual_method method of org.mockitousage.verification.BasicVerificationInOrderTest class

As you noted, act is not a mock, and therefore you cannot record behavior on it. You could use Mockito.spy to, well, spy (or partially mock) the act object so that you only record the behavior of secondMethod and execute the actual code for firstMethod.

Note, however, that matchers can't be used in doReturn calls regardles of how you're mocking or spying your object. A return value must be a concrete object.

class ActivityTest() {

  Activity act;

  @Before
  public void setup(){
     act = Mockito.spy(new Activity()); // Here!
  }

  @Test
  public void testFirstMethod(){

      Mockito.doReturn("someString").when(act).secondMethod();
      act.firstMethod();
      verify(act).secondMethod();
  }
} 

A slightly more elegant syntax allows you to use annotations instead of explicitly calling Mockito.spy, but it's a matter of taste really:

@RunWith(MockitoJUnitRunner.class)
class ActivityTest() {

  @Spy
  Activity act = new Activity();

  @Test
  public void testFirstMethod(){

      Mockito.doReturn("someString").when(act).secondMethod();
      act.firstMethod();
      verify(act).secondMethod();
  }
} 

Matchers.any(Class) will do the trick:

Mockito.when(object.doThings(Matchers.any(MyEnum.class), Matchers.anyLong()))
    .thenReturn(123L);

null will be excluded with Matchers.any(Class). If you want to include null you must use the more generic Matchers.any().

As a side note: consider using Mockito static imports:

import static org.mockito.Matchers.*;
import static org.mockito.Mockito.*;

Mocking gets a lot shorter:

when(object.doThings(any(MyEnum.class), anyLong())).thenReturn(123L);

The message is pretty obvious: You can't mock non-visible and final classes. Short answer : Create a named class of your anonymous one, and test this class instead!

Long answer, let's dig why !

An anonymous class is final

You instantiate an anonymous class of FilterFactory, when the compiler sees an anonymous class, it creates a final and package visible class. So the anonymous class is not mockable through standard mean i.e. through Mockito.

Mocking anonymous class : possible but BRITTLE if not HACKY

OK, now suppose you want to be able to mock this anonymous class through Powermock. Current compilers compile anonymous class with following scheme :

Declaring class + $ + <order of declaration starting with 1>

Mocking anonymous class possible but brittle (And I mean it) So supposing the anonymous class is the eleventh to be declared, it will appear as

InputHelper$11.class

So you could potentially prepare for test the anonymous class:

@RunWith(PowerMockRunner.class)
@PrepareForTest({InputHelper$11.class})
public class InputHelperTest {
    @Test
    public void anonymous_class_mocking works() throws Throwable {
        PowerMockito.spy(InputHelper.BZIP2_FACTORY);  // This line fails
    }
}

This code will compile, BUT will eventually be reported as an error with your IDE. The IDE probably doesn't know about InputHelper$11.class. IntelliJ who doesn't use compiled class to check the code report so.

Also the fact that the anonymous class naming actually depends on the order of the declaration is a problem, when someone adds another anonymous class before, the numbering could change. Anonymous classes are made to stay anonymous, what if the compiler guys decide one day to use letters or even random identifiers!

So mocking anonymous classes through Powermock is possible but brittle, don't ever do that in a real project!

EDITED NOTE : The Eclipse compiler has a different numbering scheme, it always uses a 3 digit number :

Declaring class + $ + <pad with 0> + <order of declaration starting with 1>

Also I don't think the JLS clearly specify how the compilers should name anonymous classes.

You don't reassign the spy to the static field

PowerMockito.spy(InputHelper.BZIP2_FACTORY);  // This line fails
whenNew(BufferedInputStream.class).withArguments(in).thenReturn(buffer);
whenNew(CBZip2InputStream.class).withArguments(buffer).thenReturn(expected);
InputStream observed = InputHelper.BZIP2_FACTORY.makeFilter(in);

PowerMockito.spy returns the spy, it doesn't change the value of InputHelper.BZIP2_FACTORY. So you would need to actually set via reflection this field. You can use the Whiteboxutility that Powermock provide.

Conclusion

Too much trouble to just test with mocks that the anonymous filter uses a BufferedInputStream.

Alternative

I would rather write the following code:

An input helper that will use the named class, I don't use the interface name to make clear to the user what is the intent of this filter!

public class InputHelper {
    public static final BufferedBZIP2FilterFactory BZIP2_FACTORY = new BufferedBZIP2FilterFactory();
}

And now the filter itself :

public class BufferedBZIP2FilterFactory {
    public InputStream makeFilter(InputStream in) {
        BufferedInputStream buffer = new BufferedInputStream(in);
        return new CBZip2InputStream(buffer);
    }
}

Now you can write a test like this :

@RunWith(PowerMockRunner.class)
public class BufferedBZIP2FilterFactoryTest {

    @Test
    @PrepareForTest({BufferedBZIP2FilterFactory.class})
    public void wraps_InputStream_in_BufferedInputStream() throws Exception {
        whenNew(CBZip2InputStream.class).withArguments(isA(BufferedInputStream.class))
                .thenReturn(Mockito.mock(CBZip2InputStream.class));

        new BufferedBZIP2FilterFactory().makeFilter(anInputStream());

        verifyNew(CBZip2InputStream.class).withArguments(isA(BufferedInputStream.class));
    }

    private ByteArrayInputStream anInputStream() {
        return new ByteArrayInputStream(new byte[10]);
    }
}

But could eventually avoid powermock stuff for this test scenario if you force the CBZip2InputStream to only accept BufferedInputStream. Usually using Powermock means something is wrong with the design. In my opinion Powermock is great for legacy softwares, but can blind developers when designing new code; as they are missing the point of OOP's good part, I would even say they are designing legacy code.

Hope that helps !

I think you do need to cast it, but it shouldn't be too bad:

Foo<Bar> mockFoo = (Foo<Bar>) mock(Foo.class);
when(mockFoo.getValue()).thenReturn(new Bar());

Let me quote the official documentation:

Important gotcha on spying real objects!

Sometimes it's impossible to use when(Object) for stubbing spies. Example:

List list = new LinkedList();
List spy = spy(list);

// Impossible: real method is called so spy.get(0) throws IndexOutOfBoundsException (the list is yet empty)
when(spy.get(0)).thenReturn("foo");

// You have to use doReturn() for stubbing
doReturn("foo").when(spy).get(0);

In your case it goes something like:

doReturn(resultsIWant).when(myClassSpy).method1();

Take a look at the Mockito API docs. As the linked document mentions (Point # 12) you can use any of the doThrow(),doAnswer(),doNothing(),doReturn() family of methods from Mockito framework to mock void methods.

For example,

Mockito.doThrow(new Exception()).when(instance).methodName();

or if you want to combine it with follow-up behavior,

Mockito.doThrow(new Exception()).doNothing().when(instance).methodName();

Presuming that you are looking at mocking the setter setState(String s) in the class World below is the code uses doAnswer method to mock the setState.

World mockWorld = mock(World.class); 
doAnswer(new Answer<Void>() {
    public Void answer(InvocationOnMock invocation) {
      Object[] args = invocation.getArguments();
      System.out.println("called with arguments: " + Arrays.toString(args));
      return null;
    }
}).when(mockWorld).setState(anyString());

From the docs:

Sometimes we need to stub with different return value/exception for the same method call. Typical use case could be mocking iterators. Original version of Mockito did not have this feature to promote simple mocking. For example, instead of iterators one could use Iterable or simply collections. Those offer natural ways of stubbing (e.g. using real collections). In rare scenarios stubbing consecutive calls could be useful, though:

when(mock.someMethod("some arg"))
   .thenThrow(new RuntimeException())
  .thenReturn("foo");

//First call: throws runtime exception:
mock.someMethod("some arg");

//Second call: prints "foo"
System.out.println(mock.someMethod("some arg"));

So in your case, you'd want:

when(myMock.doTheCall())
   .thenReturn("You failed")
   .thenReturn("Success");

The following code sample from this Mockito documentation illustrates how to mock a void method:

doThrow(new RuntimeException()).when(mockedList).clear();

// following throws RuntimeException:
mockedList.clear();

When you are invoking

Mockito.when(spy.isCertainValue()).thenReturn(true);

the method isCertainValue() is getting called here. This is how Java works: to evaluate the argument of Mockito.when, the result of spy.isCertainValue() must be evaluated so the method must be called.

If you don't want that to happen, you can use the following construct:

Mockito.doReturn(true).when(spy).isCertainValue();

This will have the same mocking effect but the method won't be called with this.