How to use shouldFindPreviousInOrder method of org.mockito.internal.invocation.InvocationsFinderTest class

Technically speaking both "mocks" and "spies" are a special kind of "test doubles".

Mockito is unfortunately making the distinction weird.

A mock in mockito is a normal mock in other mocking frameworks (allows you to stub invocations; that is, return specific values out of method calls).

A spy in mockito is a partial mock in other mocking frameworks (part of the object will be mocked and part will use real method invocations).

As the error message suggests, you cannot mock final classes with the default Mockito.

But the community came up with mockito-inline, an extension bringing experimental features such as mocking final classes and methods or static methods.

Just add this in your pom.xml and use Mockito normally.

<dependency>
    <groupId>org.mockito</groupId>
    <artifactId>mockito-inline</artifactId>
    <scope>test</scope>
</dependency>

In JUnit, Parameterized tests use a special runner that ensure that the test is instantiated multiple times, so each test method is called multiple times. Mockito is a tool for writing specific unit tests, so there is no built-in ability to run the same test multiple times with different Mockito expectations.

If you want your test conditions to change, your best bet is to do one of the following:

• Parameterize your test using JUnit, with a parameter for the mock inputs you want;
• Run a loop of different parameters in your test, which unfortunately avoids the "test one thing per method" philosophy
• Extract a method that actually performs the test, and create a new @Test method for each mock you want.

Note that there's no prohibition on using mock objects as @Parameterized test parameters. If you're looking to parameterize based on mocks, you can do that, possibly creating the mock and setting the expectations in a static method on the test.

Note about runners: This Parameterized test runner conflicts with Mockito's MockitoJUnitRunner: Each test class can only have one runner. You'll want to switch to @Before and @After methods or a Mockito JUnit4 rule for your setup, if you use them both.

As an example, compressed from a different answer that explains more about Parameterized runners versus JUnit rules and lifting from the JUnit4 Parameterized Test doc page and MockitoRule doc page:

@RunWith(Parameterized.class)
public class YourComponentTest {
    @Rule public MockitoRule rule = MockitoJUnit.rule();
    @Mock YourDep mockYourDep;

    @Parameters public static Collection<Object[]> data() { /* Return the values */ }

    public YourComponentTest(Parameter parameter) { /* Save the parameter to a field */ }

    @Test public void test() { /* Use the field value in assertions */ }
}

Adding RETURNS_DEEP_STUBS did the trick:

A a = Mockito.mock(A.class, Mockito.RETURNS_DEEP_STUBS);

From the Mockito FAQ:

What are the limitations of Mockito

• Cannot mock final methods - their real behavior is executed without any exception. Mockito cannot warn you about mocking final methods so be vigilant.

If you are mocking the behavior (with something like doNothing()) there should really be no need to call to verify*(). That said, here's my stab at re-writing your test method:

@PrepareForTest({InternalUtils.class})
@RunWith(PowerMockRunner.class)
public class InternalServiceTest { //Note the renaming of the test class.
   public void testProcessOrder() {
        //Variables
        InternalService is = new InternalService();
        Order order = mock(Order.class);

        //Mock Behavior
        when(order.isSuccessful()).thenReturn(true);
        mockStatic(Internalutils.class);
        doNothing().when(InternalUtils.class); //This is the preferred way
                                               //to mock static void methods.
        InternalUtils.sendEmail(anyString(), anyString(), anyString(), anyString());

        //Execute
        is.processOrder(order);            

        //Verify
        verifyStatic(InternalUtils.class); //Similar to how you mock static methods
                                           //this is how you verify them.
        InternalUtils.sendEmail(anyString(), anyString(), anyString(), anyString());
   }
}

I grouped into four sections to better highlight what is going on:

1. Variables

I choose to declare any instance variables / method arguments / mock collaborators here. If it is something used in multiple tests, consider making it an instance variable of the test class.

2. Mock Behavior

This is where you define the behavior of all of your mocks. You're setting up return values and expectations here, prior to executing the code under test. Generally speaking, if you set the mock behavior here you wouldn't need to verify the behavior later.

3. Execute

Nothing fancy here; this just kicks off the code being tested. I like to give it its own section to call attention to it.

4. Verify

This is when you call any method starting with verify or assert. After the test is over, you check that the things you wanted to have happen actually did happen. That is the biggest mistake I see with your test method; you attempted to verify the method call before it was ever given a chance to run. Second to that is you never specified which static method you wanted to verify.

Additional Notes

This is mostly personal preference on my part. There is a certain order you need to do things in but within each grouping there is a little wiggle room. This helps me quickly separate out what is happening where.

I also highly recommend going through the examples at the following sites as they are very robust and can help with the majority of the cases you'll need:

• https://github.com/powermock/powermock/wiki/Mockito (PowerMock Overview / Examples)
• (Mockito Overview / Examples)

PowerMock 1.6 isn't compatible with Mockito 2.7 (take a look at https://github.com/powermock/powermock/wiki/Mockito#supported-versions)

You should use PowerMock 1.7.0RC2 (or 1.7.0RC3 if 1.7.0RC2 doesn't work), and also use powermock-api-mockito2 instead of powermock-api-mockito.

The problem is that in your isEnabled you are creating a new RestTemplate. This is wrong for two reasons, one is that you cannot mock it since you are creating a new one, and second it is good to avoid creating new objects per request. RestTemplate is thread safe and hence can be a service class member, being used across many threads.

Change your service class to something like this:

public class Service{

    RestTemplate restTemplate = new RestTemplate();

    public boolean isEnabled(String xxx) {
        ResponseEntity<String> response = restTemplate.getForEntity("someurl",String.class);
        if(...)return true;
        return false;
    }
}

Now that your RestTemplate has become a class member you can now properly mock through one of two ways. One, inject it using the @InjectMock, or use a setter method that you call from your test.

Since you are using InjectMock in your code we can go with that.

@RunWith(MockitoJUnitRunner.class) 
public class ServiceTest {
    @Mock
    RestTemplate restTemplate;
    @InjectMocks
    @Spy
    Service service;
    ResponseEntity responseEntity = mock(ResponseEntity.class);

    @Test
    public void test() throws Exception {
        Mockito.when(restTemplate.getForEntity(
                Mockito.anyString(),
                ArgumentMatchers.any(Class.class)
                ))
                .thenReturn(responseEntity);
        boolean res = service.isEnabled("something");
        Assert.assertEquals(res, false);
    }

Notice that I made a few changes. First, I removed the new RestTemplate() and new Service(). You should let mockito create those for you. By annotating them with @Mock and @Spy you will ensure that Mockito will create them for you, and more importantly, will inject the mocks into your service object.

You can absolutely inject mocks on MyLauncher in your test. I am sure if you show what mocking framework you are using someone would be quick to provide an answer. With mockito I would look into using @RunWith(MockitoJUnitRunner.class) and using annotations for myLauncher. It would look something like what is below.

@RunWith(MockitoJUnitRunner.class)
public class MyLauncherTest
    @InjectMocks
    private MyLauncher myLauncher = new MyLauncher();

    @Mock
    private MyService myService;

    @Test
    public void someTest() {

    }
}