How to use InlineDelegateByteBuddyMockMakerTest method of org.mockito.internal.creation.bytebuddy.InlineDelegateByteBuddyMockMakerTest class

Okey, found the answer, you need to call to

@PrepareForTest(Foo.class)

instead of

@PrepareForTest(Bar.class)

You are only asking Mockito to call the real thing on clear, the underlying object is still a fake created by Mockito for you. If you need a real LinkedList then just use the LinkedList - only the most heated purist of BDD would tell you to mock everything around you. I mean, you are not mocking Strings are you?

Mockito author himself has said that calling the real thing should be used scarcely, usually only for testing a legacy code.

If you need to spy on the real object (track the invocations) then Mockito has a feature for this too:

List list = new LinkedList();
List spy = spy(list);

With spy, you can still stub a method if you need. It basically works like a mock, but isn't ;)

You are looking for an ArgumentCaptor:

  Mock mock =  Mockito.mock(Mock.class);
  ArgumentCaptor<String> captor = ArgumentCaptor.forClass(String.class);
  mock.method("input");
  Mockito.verify(mock).method(captor.capture());
  String actualValue = captor.getValue();

Testing your code is not trivial, though not impossible. My first idea was to use ArgumentCaptor, which is much easier both to use and comprehend compared to ArgumentMatcher. Unfortunately the test still fails - reasons are certainly beyond the scope of this answer, but I may help if that interests you. Still I find this test case interesting enough to be shown (not correct solution):

@RunWith(MockitoJUnitRunner.class)
public class MessageServiceTest {

    @Mock
    private MessageDAO messageDAO = mock(MessageDAO.class);

    private MessageService messageService = new MessageService();

    @Before
    public void setup() {
        messageService.setDao(messageDAO);
    }

    @Test
    public void testAcceptFromOffice() throws Exception {
        //given
        final Message message = new Message();

        //when
        messageService.acceptFromOffice(message);

        //then
        ArgumentCaptor<Message> captor = ArgumentCaptor.forClass(Message.class);

        verify(messageDAO, times(2)).makePersistent(captor.capture());

        final List<Message> params = captor.getAllValues();
        assertThat(params).containsExactly(message, message);

        assertThat(params.get(0).getStatus()).isEqualTo(0);
        assertThat(params.get(1).getStatus()).isEqualTo(1);
    }

}

Unfortunately the working solution requires somewhat complicated use of Answer. In a nutshell, instead of letting Mockito to record and verify each invocation, you are providing sort of callback method that is executed every time your test code executes given mock. In this callback method (MakePersistentCallback object in our example) you have access both to parameters and you can alter return value. This is a heavy cannon and you should use it with care:

    @Test
    public void testAcceptFromOffice2() throws Exception {
        //given
        final Message message = new Message();
        doAnswer(new MakePersistentCallback()).when(messageDAO).makePersistent(message);

        //when
        messageService.acceptFromOffice(message);

        //then
        verify(messageDAO, times(2)).makePersistent(message);
    }


    private static class MakePersistentCallback implements Answer {

        private int[] expectedStatuses = {0, 1};
        private int invocationNo;

        @Override
        public Object answer(InvocationOnMock invocation) throws Throwable {
            final Message actual = (Message)invocation.getArguments()[0];
            assertThat(actual.getStatus()).isEqualTo(expectedStatuses[invocationNo++]);
            return null;
        }
    }

The example is not complete, but now the test succeeds and, more importantly, fails when you change almost anything in CUT. As you can see MakePersistentCallback.answer method is called every time mocked messageService.acceptFromOffice(message) is called. Inside naswer you can perform all the verifications you want.

NB: Use with caution, maintaining such tests can be troublesome to say the least.

verify(serviceMock, times(1)).serviceA();
verifyNoMoreInteractions(serviceMock);

From Mockito's javadoc on verifyNoMoreInteractions:

You can use this method after you verified your mocks - to make sure that nothing else was invoked on your mocks.

Also:

A word of warning: Some users who did a lot of classic, expect-run-verify mocking tend to use verifyNoMoreInteractions() very often, even in every test method. verifyNoMoreInteractions() is not recommended to use in every test method. verifyNoMoreInteractions() is a handy assertion from the interaction testing toolkit. Use it only when it's relevant. Abusing it leads to overspecified, less maintainable tests.

Spring's MockRestServiceServer is exactly what you're looking for.

Short description from javadoc of the class:

Main entry point for client-side REST testing. Used for tests that involve direct or indirect (through client code) use of the RestTemplate. Provides a way to set up fine-grained expectations on the requests that will be performed through the RestTemplate and a way to define the responses to send back removing the need for an actual running server.

Try to set up your test like this:

@WebAppConfiguration
@ContextConfiguration(classes = {YourSpringConfig.class})
@RunWith(SpringJUnit4ClassRunner.class)
public class ExampleResourceTest {

    private MockMvc mockMvc;
    private MockRestServiceServer mockRestServiceServer;

    @Autowired
    private WebApplicationContext wac;

    @Autowired
    private RestOperations restOperations;

    @Before
    public void setUp() throws Exception {
        mockMvc = MockMvcBuilders.webAppContextSetup(this.wac).build();
        mockRestServiceServer = MockRestServiceServer.createServer((RestTemplate) restOperations);
    }


    @Test
    public void testMyApiCall() throws Exception {
        // Following line verifies that our code behind /api/my/endpoint made a REST PUT
        // with expected parameters to remote service successfully
        expectRestCallSuccess();

        this.mockMvc.perform(MockMvcRequestBuilders.get("/api/my/endpoint"))
            .andExpect(status().isOk());
    }

    private void expectRestCallSuccess() {
        mockRestServiceServer.expect(
            requestTo("http://remote.rest.service/api/resource"))
            .andExpect(method(PUT))
            .andRespond(withSuccess("{\"message\": \"hello\"}", APPLICATION_JSON));
    }


}

If you want the mocked method to call a method on (or otherwise alter) a parameter, you'll need to write an Answer as in this question ("How to mock a void return method affecting an object").

From Kevin Welker's answer there:

doAnswer(new Answer() {
    Object answer(InvocationOnMock invocation) {
        Object[] args = invocation.getArguments();
        ((MyClass)args[0]).myClassSetMyField(NEW_VALUE);
        return null; // void method, so return null
    }
}).when(mock).someMethod();

Note that newer best-practices would have a type parameter for Answer, as in Answer<Void>, and that Java 8's lambdas can compress the syntax further. For example:

doAnswer(invocation -> {
  Object[] args = invocation.getArguments();
  ((MyClass)args[0]).myClassSetMyField(NEW_VALUE);
  return null; // void method in a block-style lambda, so return null
}).when(mock).someMethod();

First, you can't prevent people from messing with your game by declaring things 'final'. There are reflection tricks and whole code generation libraries that make it merely slightly inconvenient to get past this.

So, lose the finals, and then you can use jmock or whatever library you like to make mocks.

You can accomplish what you want with Mockito's argument matchers:

myObject.doSomeStuff();

verify(myMockedOtherObject, never()).someMethodOrOther(
    Mockito.anyString(),
    Mockito.anyString()
);

You can make that a little less verbose with a static import like you have for verify and never.