TestMu 2025 - The Largest Virtual Software Testing Conference is Back | 50,000+ Attendees

How to use getResolvedTestConfigOverride method in Cypress

Best JavaScript code snippet using cypress

runner.js

...445    // reduce this runnable down to its props446    // and collections447    const wrappedRunnable = wrapAll(runnable)448    if (runnable.type === 'test') {449      const cfg = getResolvedTestConfigOverride(runnable)450      if (_.size(cfg)) {451        runnable._testConfig = cfg452        wrappedRunnable._testConfig = cfg453      }454      wrappedRunnable._titlePath = runnable.titlePath()455    }456    if (prevAttempts) {457      wrappedRunnable.prevAttempts = prevAttempts458    }459    return wrappedRunnable460  }461  const push = (test) => {462    return tests[test.id] != null ? tests[test.id] : (tests[test.id] = test)463  }...

Using AI Code Generation

1const { getResolvedTestConfigOverride } = require('@cypress/config')2const { getTestConfig } = require('@cypress/config')3const { getEnv } = require('@cypress/config')4const { getConfig } = require('@cypress/config')5const { getProjectRoot } = require('@cypress/config')6const { getTestConfigOverrides } = require('@cypress/config')7const { getTestConfigOverridesAndOptions } = require('@cypress/config')8const { getTestConfigOverridesFromArgs } = require('@cypress/config')9const { getTestConfigOverridesFromEnv } = require('@cypress/config')10const { getTestConfigOverridesFromOptions } = require('@cypress/config')11const { getTestConfigOverridesFromPlugins } = require('@cypress/config')12const { getTestConfigOverridesFromRecordKey } = require('@cypress/config')13const { getTestConfigOverridesFromSpec } = require('@cypress/config')14const { getTestConfigOverridesFromTestFiles } = require('@cypress/config')15const { getTestConfigOverridesFromTestOptions } = require('@cypress/config')16const { getTestConfigOverridesFromTestOptionsAndSpec } = require('@cypress/config')17const { getTestConfigOverridesFromTestOptionsAndSpecs } = require('@cypress/config')18const { getTestConfigOverridesFromTestOptionsAndTestFiles } = require('@cypress/config')19const { getTestConfigOverridesFromTestOptionsAndTestFilesAndSpecs } = require('@cypress/config')20const { getTestConfigOverridesFromTestOptionsAndTestFilesAndSpecsAndRecordKey } = require('@cypress/config')21const { getTestConfigOverridesFromTestOptionsAndTestFilesAndSpecsAndRecordKeyAndEnv } = require('@cypress/config')22const { getTestConfigOverridesFromTestOptionsAndTestFilesAndSpecsAndRecordKeyAndEnvAndConfig } = require('@cypress/config')23const { getTestConfigOverridesFromTestOptionsAndTestFilesAndSpecsAndRecordKeyAndEnvAndConfigAndProjectRoot } = require('@cypress/config')24const { getTestConfigOverridesFromTestOptionsAndTestFilesAndSpecsAndRecordKeyAndEnvAndConfigAndProjectRootAndArgs } = require('@cypress/config')25const { getTestConfigOverridesFromTestOptionsAndTestFilesAndSpecsAndRecordKeyAndEnvAndConfigAndProjectRootAndArgsAndOptions } = require('@cypress/config')26const { get

Using AI Code Generation

1const { getResolvedTestConfigOverride } = Cypress.config2const testConfig = getResolvedTestConfigOverride('testConfig')3Cypress.Commands.add('getResolvedTestConfigOverride', (key) => {4  return Cypress.config(key)5})6describe('Test', () => {7  it('Test', () => {8    cy.get('input[name="q"]').type(env.searchTerm)9  })10})11{12  "env": {13    "testConfig": {14      "env": {15      }16    }17  }18}19{20  "testConfig": {21    "env": {22    }23  }24}

Using AI Code Generation

1describe('Test', function() {2  it('test', function() {3    const resolvedConfig = Cypress.config().getResolvedTestConfigOverride();4    console.log(resolvedConfig);5  });6});7{8  "env": {9  }10}11{12  "env": {13  }14}15{16  env: {17  }18}19{20  env: {21  }22}23{24  env: {25  }26}27{28  env: {29  }30}31{32  env: {33  }34}35{36  env: {37  }38}39{40  env: {41  }42}43{

Using AI Code Generation

1const { getResolvedTestConfigOverride } = Cypress2describe('test', () => {3  it('test', () => {4    const config = getResolvedTestConfigOverride()5    expect(config).to.have.property('baseUrl')6    expect(config).to.have.property('testFiles')7    expect(config).to.have.property('env')8    expect(config).to.have.property('watchForFileChanges')9    expect(config).to.have.property('defaultCommandTimeout')10    expect(config).to.have.property('requestTimeout')11    expect(config).to.have.property('pageLoadTimeout')12    expect(config).to.have.property('responseTimeout')13    expect(config).to.have.property('execTimeout')14    expect(config).to.have.property('viewportWidth')15    expect(config).to.have.property('viewportHeight')16    expect(config).to.have.property('animationDistanceThreshold')17    expect(config).to.have.property('numTestsKeptInMemory')18    expect(config).to.have.property('reporter')19    expect(config).to.have.property('reporterOptions')20    expect(config).to.have.property('video')21    expect(config).to.have.property('videoUploadOnPasses')22    expect(config).to.have.property('vi

StackOverFlow community discussions

Questions

Discussion

Cypress and Script Injection inside test scenario

Cypress OPENSSL_internal:NO_START_LINE

In Cypress how to select input element based on name?

Cypress - Is it possible to verify text in prompt?

Cypress - set local storage value from a fixture file

Cypress: Wait for all requests to /graphql endpoint

Can't find source of: `uncaught syntaxerror` (only occurs in cypress)

Cypress wait for API after button click

How to let Cypress return custom errors or messages

How to pass variables into cy.request for graphql/apollo without string interpolation

Yes, there is. Cypress is actually running in the browser, and although commands are queued asynchronously, you can queue up native JS code to be run, like so:

cy.get("html").then(() => {
    document.querySelector("div.myDiv").innerHTML = "...";
    // ...
});

If you are trying to target or modify a specific element, you can get it via Cypress to take advantage of automatic retries to wait for the element to exist before operating on it:

cy.get("div.myDiv").then(elem => {
    elem.innerHTML = "...";
    // ...
});

https://stackoverflow.com/questions/52258630/cypress-and-script-injection-inside-test-scenario

I ran into this issue running cypress on OSX. In my case the fix was as follows:

Navigate into the directory cypress stores it's proxy certificates. In my case this folder was located here:

cd ~/Library/Application\ Support/Cypress/cy/production/proxy/

Within this folder, there is certs and keys, both have files with a list of domains accessed during cypress tests. In my case the final two files in each folder were empty:

~#: ls -lah key
total 240
...
-rw-r--r--   1 sam  staff     0B  6 May 16:40 www.google-analytics.com.key
-rw-r--r--   1 sam  staff     0B  6 May 16:40 www.google-analytics.com.public.key

~#: ls -lah certs
total 120
...
-rw-r--r--   1 sam  staff     0B  6 May 13:27 www.google-analytics.com.pem
-rw-r--r--   1 sam  staff     0B  6 May 13:27 www.googletagmanager.com.pem

I'm not sure why these .pem and .key files were empty for a handful of domains, but deleting them and rerunning a cypress test successfully regenerated them as non-empty and the tests started to pass.

https://stackoverflow.com/questions/66416226/cypress-openssl-internalno-start-line

Why don't you directly target the input field using the following code

cy.get('input[name="teacher[0].number"]').type('8000-1612023')

Please find the screenshot below for a successful test. I would also recommend you to change the type of input in your HTML to tel

HTML:

<input required="" type="tel" name="teacher[0].number" value="">

Cypress:

describe('Trial', function() {
  it('Test', function() {
    cy.visit('http://localhost:8080/trials/')
    cy.get('input[name="teacher[0].number"]').type('8000-1612023')
  })
});

Test Result:

https://stackoverflow.com/questions/55716154/in-cypress-how-to-select-input-element-based-on-name

You can set up a stub before the action that triggers the prompt:

Generally,

let stub;

cy.window().then(win => {
  stub = cy.stub(win, 'prompt').returns(' World')  // types this value 
})

cy.get('button-opening-prompt').click()

cy.wrap(stub).should(() => {
  expect(stub).to.have.been.calledWith('Hello') // argument is the message
                                                // displayed in the prompt
})

A simple app that prompts after 2 seconds:

<body>
  <div>Hello </div>
  <script>
    setTimeout(() => {
      const result = window.prompt('Hello')
      const div = document.querySelector('div')
      div.innerText += result 
    }, 2000)
  </script>
</body>

This can be tested with

let stub;

cy.visit('http://127.0.0.1:5500/html/prompt.html', {   
  onBeforeLoad: (win) => {
    stub = cy.stub(win, 'prompt').returns(' World')
  }
})

cy.get('div').should('contain', 'Hello World')   // checks the result added to page

cy.wrap(stub).should(() => {
  expect(stub).to.have.been.calledWith('Hello')
})

Cancel button

To test the cancel button being pressed, substitute

stub = cy.stub(win, 'prompt').callsFake(() => null)

https://stackoverflow.com/questions/73903455/cypress-is-it-possible-to-verify-text-in-prompt

After Dan's hint from the comment, it worked.

Updated code:

 it('sets the local storage value from fixture', () => {
        cy.fixture('requiredJsonData.json').then((value) => {
          cy.log(JSON.stringify(value));  
          localStorage.setItem('entries', JSON.stringify(value));
          cy.log(localStorage.getItem('entries'));
          const details = localStorage.getItem('entries');
          cy.log(details);
         })
      })

https://stackoverflow.com/questions/68650201/cypress-set-local-storage-value-from-a-fixture-file

Cypress detected that you returned a promise from a command... refers to the fact that you are waiting on the intercept alias within the handler.

Since the handler is event response code, the usual pattern is

cy.intercept(...)  // set up the listener

cy.visit(...)  // trigger the events (might also be from UI event like click())

cy.wait('@my-alias')

But this means the aliases should be known ahead of time.

Simplest is if you can find out all the ids,

const aliases = ['1', '2', '3'].map(id => `@gql${id}Query`)

const handleGraphql = (req) => req.alias = `gql${req.headers['query-id']}Query`;

before(() => {
  cy.intercept('POST', '**/graphql', handleGraphql)  // set up the listener
})

it('waits for all ids', () => {
  cy.visit(...)  // trigger the events (might also be from UI event like click())

  cy.wait(aliases)
}

If you can't be specific about the ids, then you either need to wait an arbitrary time for all requests to happen (which is flaky if the wait is too short, or annoying if the wait is too long) or assert an element or other DOM artefact that only appears after all requests are finished.

Your id's are generated, so don't use them in the alias. Use a "generic" alias and wait for the required count

const calls = 4

before(() => {
 cy.intercept('POST', '**/graphql').as('gqlQuery')
})

it('waits for all ids', () => {
 cy.visit(...)  // trigger the events (might also be from UI event like click())

 cy.wait(`@gqlQuery.${calls}`)
}

There's some warnings around the alias.n syntax being undocumented, but you could substitute

Cypress._.times(calls, () => cy.wait('@gqlQuery'))

https://stackoverflow.com/questions/70963440/cypress-wait-for-all-requests-to-graphql-endpoint

If someone else runs into this in the future, mine was down to trying to load a non existent JS file(from my index page).

Cypress seems to hide the error, so logging it helped;

Cypress.on('uncaught:exception', (err, runnable) => {
  console.log(err);
  return false;
})

https://stackoverflow.com/questions/54833962/cant-find-source-of-uncaught-syntaxerror-only-occurs-in-cypress

Sounds like you'll want to wait for the routes. Something like this:

cy.server();
cy.route('GET', '/api/route1').as('route1');
cy.route('GET', '/api/route2').as('route2');
cy.route('GET', '/api/route3').as('route3');

cy.get('button').contains('Filter').click();

// setting timeout because you mentioned it can take up to 15 seconds.
cy.wait(['@route1', '@route2', 'route3'], { responseTimeout: 15000 });

// This won't execute until all three API calls have returned
cy.get('#something').click();

https://stackoverflow.com/questions/56809507/cypress-wait-for-api-after-button-click

You can use Cypress.log for that:

if (resp.status !== 201) {
  Cypress.log({
    name: 'Authentication',
    message: 'failed'
  })
}
expect(resp).its('status').eq(201)

https://stackoverflow.com/questions/54748914/how-to-let-cypress-return-custom-errors-or-messages

The solution was much easier than anticipated. Unfortunately, I didn't see any example of this online but it works great.

export const loginQuery = `
  mutation login($email: String!, $password: String!) {
    login(email: $email, password: $password) {
      authToken
    }
  }
`;

export default ({ url, method, userPath }) => {
  cy.fixture(userPath).then(res => {
    cy.request({
      method,
      url,
      headers: { 'Content-Type': 'application/json' },
      body: { query: loginQuery, variables: res },
      failOnStatusCode: false
    });
  });
};

I had no idea I could just declare variables in the body and they would pass in without issue if I structured the query/mutation as I would normally.

The closest to my successful solution was this gist https://gist.github.com/yusinto/30bba51b6f903c1b67e0383f4a288269 . However, the gist still used string interpolation. Looks like he could simplify his gist by just setting variables.

This gist was found with @xadm 's suggested search string SO for mutations using fetch/curl/etc

https://stackoverflow.com/questions/63995954/how-to-pass-variables-into-cy-request-for-graphql-apollo-without-string-interpol

Blogs

Check out the latest blogs from LambdaTest on this topic:

How To Find HTML Elements Using Cypress Locators

Cypress is a new yet upcoming automation testing tool that is gaining prominence at a faster pace. Since it is based on the JavaScript framework, it is best suited for end-to-end testing of modern web applications. Apart from the QA community, Cypress can also be used effectively by the front-end engineers, a requirement that cannot be met with other test automation frameworks like Selenium.

How To Fill And Submit Forms In Cypress

Web forms are one of the most common types of forms that you may have encountered when interacting with websites. An example of a simple form is a login page, where the user needs to enter the login credentials to access the relevant features of the platform. On the other hand, complex forms can contain a combination of user details, captchas, date pickers, and more.

Complete Automation Testing – Is It Feasible?

It is a fact that software testing is time and resources consuming. Testing the software can be observed from different perspectives. It can be divided based on what we are testing. For example, each deliverable in the project, like the requirements, design, code, documents, user interface, etc., should be tested. Moreover, we may test the code based on the user and functional requirements or specifications, i.e., black-box testing. At this level, we are testing the code as a black box to ensure that all services expected from the program exist, work as expected, and with no problem. We may also need to test the structure of the code, i.e., white box testing. Testing can also be divided based on the sub-stages or activities in testing, for instance, test case generation and design, test case execution and verification, building the testing database, etc. Testing ensures that the developed software is, ultimately, error-free. However, no process can guarantee that the developed software is 100% error-free.

13 Best Test Automation Frameworks: The 2021 List

Automation frameworks enable automation testers by simplifying the test development and execution activities. A typical automation framework provides an environment for executing test plans and generating repeatable output. They are specialized tools that assist you in your everyday test automation tasks. Whether it is a test runner, an action recording tool, or a web testing tool, it is there to remove all the hard work from building test scripts and leave you with more time to do quality checks. Test Automation is a proven, cost-effective approach to improving software development. Therefore, choosing the best test automation framework can prove crucial to your test results and QA timeframes.

Is Cross Browser Testing Still Relevant?

We are nearing towards the end of 2019, where we are witnessing the introduction of more aligned JavaScript engines from major browser vendors. Which often strikes a major question in the back of our heads as web-developers or web-testers, and that is, whether cross browser testing is still relevant? If all the major browser would move towards a standardized process while configuring their JavaScript engines or browser engines then the chances of browser compatibility issues are bound to decrease right? But does that mean that we can simply ignore cross browser testing?

Cypress Tutorial

Cypress is a renowned Javascript-based open-source, easy-to-use end-to-end testing framework primarily used for testing web applications. Cypress is a relatively new player in the automation testing space and has been gaining much traction lately, as evidenced by the number of Forks (2.7K) and Stars (42.1K) for the project. LambdaTest’s Cypress Tutorial covers step-by-step guides that will help you learn from the basics till you run automation tests on LambdaTest.

Chapters:

What is Cypress? -
Why Cypress? - Learn why Cypress might be a good choice for testing your web applications.
Features of Cypress Testing - Learn about features that make Cypress a powerful and flexible tool for testing web applications.
Cypress Drawbacks - Although Cypress has many strengths, it has a few limitations that you should be aware of.
Cypress Architecture - Learn more about Cypress architecture and how it is designed to be run directly in the browser, i.e., it does not have any additional servers.
Browsers Supported by Cypress - Cypress is built on top of the Electron browser, supporting all modern web browsers. Learn browsers that support Cypress.
Selenium vs Cypress: A Detailed Comparison - Compare and explore some key differences in terms of their design and features.
Cypress Learning: Best Practices - Take a deep dive into some of the best practices you should use to avoid anti-patterns in your automation tests.
How To Run Cypress Tests on LambdaTest? - Set up a LambdaTest account, and now you are all set to learn how to run Cypress tests.

Certification

You can elevate your expertise with end-to-end testing using the Cypress automation framework and stay one step ahead in your career by earning a Cypress certification. Check out our Cypress 101 Certification.