How to use getDomainNameFromUrl method in Cypress

Your app seems to be using pointer events, so try replacing mouse with pointer in all those event names.

Also, here's a more complete abstraction around drag-and-drop:

const dragTo = (subject, to, opts) => {

  opts = Cypress._.defaults(opts, {
    // delay inbetween steps
    delay: 0,
    // interpolation between coords
    steps: 0,
    // >=10 steps
    smooth: false,
  })

  if (opts.smooth) {
    opts.steps = Math.max(opts.steps, 10)
  }

  const win = subject[0].ownerDocument.defaultView

  const elFromCoords = (coords) => win.document.elementFromPoint(coords.x, coords.y)
  const winMouseEvent = win.MouseEvent

  const send = (type, coords, el) => {

    el = el || elFromCoords(coords)

    if (type.includes('drag') || type === 'drop') {
      return el.dispatchEvent(
        new Event(type, Object.assign({}, { clientX: coords.x, clientY: coords.y }, { bubbles: true, cancelable: true }))
      )
    }

    el.dispatchEvent(
      new winMouseEvent(type, Object.assign({}, { clientX: coords.x, clientY: coords.y }, { bubbles: true, cancelable: true }))
    )
  }

  const toSel = to

  function drag (from, to, steps = 1) {

    const fromEl = elFromCoords(from)

    const _log = Cypress.log({
      $el: fromEl,
      name: 'drag to',
      message: toSel,
    })

    _log.snapshot('before', { next: 'after', at: 0 })

    _log.set({ coords: to })

    send('mouseover', from, fromEl)
    send('pointerover', from, fromEl)
    send('mousedown', from, fromEl)
    send('pointerdown', from, fromEl)
    send('dragstart', from, fromEl)

    cy.then(() => {
      return Cypress.Promise.try(() => {

        if (steps > 0) {

          const dx = (to.x - from.x) / steps
          const dy = (to.y - from.y) / steps

          return Cypress.Promise.map(Array(steps).fill(), (v, i) => {
            i = steps - 1 - i

            let _to = {
              x: from.x + dx * (i),
              y: from.y + dy * (i),
            }

            send('mousemove', _to, fromEl)

            return Cypress.Promise.delay(opts.delay)

          }, { concurrency: 1 })
        }
      })
      .then(() => {

        send('mousemove', to, fromEl)
        send('pointermove', to, fromEl)
        send('drag', to, fromEl)
        send('mouseover', to)
        send('pointerover', to)
        send('dragover', to)
        send('mousemove', to)
        send('pointermove', to)
        send('drag', to)
        send('mouseup', to)
        send('pointerup', to)
        send('dragend', to)
        send('drop', to)

        _log.snapshot('after', { at: 1 }).end()

      })

    })

  }

  const $el = subject
  const fromCoords = getCoords($el)
  const toCoords = getCoords(cy.$$(to))

  drag(fromCoords, toCoords, opts.steps)
}

const getCoords = ($el) => {
  const domRect = $el[0].getBoundingClientRect()
  const coords = { x: domRect.left + (domRect.width / 2 || 0), y: domRect.top + (domRect.height / 2 || 0) }

  return coords
}

Cypress.Commands.addAll(
  { prevSubject: 'element' },
  {
    dragTo,
  }
)

Here's how you'd use it:

describe('mxGraph "ports" example', function () {
  beforeEach(() => {
    cy.visit('https://jgraph.github.io/mxgraph/javascript/examples/ports.html')
    cy.get('div#splash').should('not.be.visible')
  })

  // Example #1 : FAIL
  it('#1 Create new object by dragging', function () {
    cy.get('div[id="sidebarContainer"]').find('img[title="Drag this to the diagram to create a new vertex"]').first()
    .dragTo('div[id="graphContainer"]')
  })
})

Your problem stems from the fact that cypress commands are not promises, although behaving like promises.

I can think of two options:

• Try to refactor your test code to not use async/await, as these commands don't behave as expected when running your code on cypress (check this bug). Cypress already has a whole way of dealing with async code as it creates a command queue that always run sequentially and in the expected order. That means you could observe the effects of your async code to validate that it happened before moving forward on your test. For instance, if User.createUserOnServer must wait a successful API call, add code to your test that will wait for the request to complete, using cy.server(), cy.route() and cy.wait(), like below:

  cy.server();
  cy.route('POST', '/users/').as('createUser');
  // do something to trigger your request here, like user.createOnServer()
  cy.wait('@createUser', { timeout: 10000});
  

• Use another third-party library that changes how cypress works with async/await, like cypress-promise. This lib may help you to treat cypress commands as promises that you can await in your before code (read more about it in this article).

Not really less code, but gives you a stronger test:

If you use a Set you can verify the lengths of .children() and the length of the set.

The Set object lets you store unique values of any type

This does not limit you to comparing next and current, it compares across all children.

cy.get(".grid").children()
  .then($els => {
    const setOfTexts = new Set();
    [...$els].forEach(el => setOfTexts.add(el.innerText)); // only stores unique values
    return setOfTexts;
  })
  .then(setOfTexts => {
     cy.get(".grid").children().its('length')
       .should('eq', setOfTexts.size)
  })

or with a reducer,

cy.get(".grid").children()
  .then($els => [...$els].reduce((acc, el) => {
    acc.add(el.innerText)
  }, new Set()))
  .then(setOfTexts => {
     cy.get(".grid").children().its('length')
       .should('eq', setOfTexts.size)
  })

Some more ideas:

On-the-fly retry changes

TLDR
Upside: simple
Downside: uses internal commands

There's an internal command that will allow you to change the retry count mid-test.

I stress the word internal as a warning that it may stop working at some new release.

With your code

export class Login {
  ...

  login(email, password) {

    const originalRetries = cy.state('runnable')._retries

    cy.state('runnable')._retries = 5    // WARNING - internal command
    
    this.username_input().type(email);
    ...

    cy.state('runnable')._retries = originalRetries  // restore configured retries value
  }
}

Retry by recursion

TLDR
Upside: good for flaky situations
Downside: explicit wait required

If you want the longer but more mainstream solution, use recursion.

You will need a non-failing check to handle the retry-or-finish logic, which will essentially mean changing cy.get('.profile-content').should('exist') to a jQuery equivalent and using an explicit wait (a downside for this pattern).

export class Login {
  ...

  loginAttempt(attempt = 0) {       
    
    if (attempt === 3) throw 'Unable to login after 3 attempts'

    this.login_button().click();
    
    // wait for login actions to change the page
    cy.wait(200).then(() => {  
      
      // test for success
      if (Cypress.$('.profile-content').length > 0) {
        return // found it, so finish
      }

      // retry
      loginAttempt(email, password, ++attempt)  
    })
  }

  login(email, password) {
    this.username_input().type(email);  
    this.password_input().type(password);
    loginAttempt()
    return this
  }
}

You can cut the cy.wait(200) down a bit and raise the maximum attempt, say cy.wait(20) and if (attempt === 300)

The downside is each retry uses up a bit more heap memory, so taking that too far will be detrimental - you'll need to experiment.

Set logged-in state directly

TLDR
Upside: By-passes flaky parts of test
Downside: Requires knowledge of login state

The other aspect you may consider is to cut out the flaky login altogether. To do that, you need to find out what the app considers to be logged-in. Is it a cookie, localstorage value, etc.

For each test that needs to be in logged-in state but is not actually testing the login process, set that state directly.

An example is given here recipes - logging-in__using-app-code

describe('logs in', () => {
  it('by using application service', () => {
    cy.log('user service login')

    // see https://on.cypress.io/wrap
    // cy.wrap(user promise) forces the test commands to wait until
    // the user promise resolves. We also don't want to log empty "wrap {}"
    // to the command log, since we already logged a good message right above
    cy.wrap(userService.login(Cypress.env('username'), Cypress.env('password')), {
      log: false,
    }).then((user) => {
    // the userService.login resolves with "user" object
    // and we can assert its values inside .then()

      // confirm general shape of the object
      expect(user).to.be.an('object')
      expect(user).to.have.keys([
        'firstName',
        'lastName',
        'username',
        'id',
        'token',
      ])

      // we don't know the token or id, but we know the expected names
      expect(user).to.contain({
        username: 'test',
        firstName: 'Test',
        lastName: 'User',
      })
    })

function login (username, password) {
  const requestOptions = {
    method: 'POST',
    headers: { 'Content-Type': 'application/json' },
    body: JSON.stringify({ username, password }),
  }

  return fetch(`${config.apiUrl}/users/authenticate`, requestOptions)
  .then(handleResponse)
  .then((user) => {
    // login successful if there's a jwt token in the response
    if (user.token) {
      // store user details and jwt token in local storage to keep user logged in between page refreshes
      localStorage.setItem('user', JSON.stringify(user))
    }

    return user
  })
}

You don't need to extract the folder path from the ui.

Instead, use this function:

const path = Cypress.config('downloadsFolder')

It returns an absolute path.

You can also specify the downloadsFolder in the config:

This answer was initially found for a similar Vue/Cypress question answered by @Richard Matsen - His answer can be found here

Essentially, we just call the window with cypress then using the window, we'll access our variables.

Using the example above, you can get variables which are server is loaded via js source files:

Solution

Your variable to get

var varyingUrl  = 'www.google.com';

The cypress code:

cy.window().then((win) => {
    // use this area to code using the variable, prepending with "win." eg.
    cy.log(win.varyingUrl) // or console.log(win.varyingUrl)

})

Console output:

'www.google.com'

I was able to find the solution by looking into the request cypress doc - https://docs.cypress.io/api/commands/request.html#Request-Polling

Since the API endpoint I wanted to call was different from the application I was working on so I used cy.request() instead of cy.server() cy.route()

    function getStatus() {
        cy.request({
            method: 'GET',
            url: Cypress.config('endpoint'),
            auth: {
                'username': Cypress.config('username'),
                'password': Cypress.config('password')
            }
        }).then((response) => {
            if (response.body.status == "Success")
                return
            else
                getStatus()
        })
    }

    //Trigger the above function
    cy.then(getStatus)

I might be crazy, and i have not tested this yet, but I wanted to throw this out there

I assume you are testing that there should NEVER be a loading indicator and it is waiting the default 4 seconds and the indicator goes away, and thus your test pass. So below I set the wait to zero, so it does not wait. I am also confused as to why you don't fix the actual code so you don't see the indicator if you are not supposed to. Perhaps you don't have access to the code..

cy.get('[data-test="loading"]',{ timeout: 0 }).should('not.exist');

cy.get('[data-test="loading"]',{ timeout: 0 }).should('not.be.visible');

You just need a return on the cy.request() call.

Add(someName) {
  return cy.request ({...})
    .then(function(response) {
      return response.body      // maps the response to it's body
    })                         // so return value of function is response.body 
}

The return value type is a Chainer (the same type as all Cypress commands) so you must use a .then() on it

myPO.Add('myName').then(body => ...

You don't need .then() after cy.request()

If you want the full response,

Add(someName) {
  return cy.request ({...})    // don't need a .then() after this 
                              // to return full response
}

How to await the result

If you want to await the result, use a Cypress.Promise as shown here

Add(someName) {
  return new Cypress.Promise((resolve, reject) => {
    cy.request ({...})
      .then(response => resolve(response))
  })
}

Awaiting

const response = await myPO.Add('myName')