Unlock 30% off on Manual Testing Annual Plans this Holiday Season.

Copied to Clipboard!

How to use SetInterrupt method of stream Package

Best Toxiproxy code snippet using stream.SetInterrupt

io_chan.go

Source:io_chan.go

...45func NewChanReader(input <-chan *StreamChunk) *ChanReader {46	return &ChanReader{input, make(chan struct{}), []byte{}}47}48// Specify a channel that can interrupt a read if it is blocking.49func (c *ChanReader) SetInterrupt(interrupt <-chan struct{}) {50	c.interrupt = interrupt51}52// Read from the channel into `out`. This will block until data is available,53// and can be interrupted with a channel using `SetInterrupt()`. If the read54// was interrupted, `ErrInterrupted` will be returned.55func (c *ChanReader) Read(out []byte) (int, error) {56	if c.buffer == nil {57		return 0, io.EOF58	}59	n := copy(out, c.buffer)60	c.buffer = c.buffer[n:]61	if len(out) <= len(c.buffer) {62		return n, nil63	} else if n > 0 {64		// We have some data to return, so make the channel read optional65		select {66		case p := <-c.input:67			if p == nil { // Stream was closed...

SetInterrupt

Using AI Code Generation

1import (2func main() {3	config := sarama.NewConfig()4	brokers := []string{"localhost:9092"}5	master, err := sarama.NewConsumer(brokers, config)6	if err != nil {7		panic(err)8	}9	defer func() {10		if err := master.Close(); err != nil {11			panic(err)12		}13	}()14	consumer, err := master.ConsumePartition("test", 0, sarama.OffsetNewest)15	if err != nil {16		panic(err)17	}18	signals := make(chan os.Signal, 1)19	signal.Notify(signals, syscall.SIGINT, syscall.SIGTERM)20	go func() {21		for {22			select {23			case msg := <-consumer.Messages():24				fmt.Println("Received messages", string(msg.Value))25			case err := <-consumer.Errors():26				fmt.Println("Error: ", err)27				fmt.Println("Interrupt is detected")28				consumer.AsyncClose()29			}30		}31	}()32	time.Sleep(10 * time.Second)33}

SetInterrupt

Using AI Code Generation

1import (2func main() {3        d := ftdi.Device{}4        if err := d.Open(0x0403, 0x6010); err != nil {5                panic(err)6        }7        defer d.Close()8        if err := d.SetBitMode(0x00, ftdi.BITMODE_RESET); err != nil {9                panic(err)10        }11        if err := d.SetBitMode(0x00, ftdi.BITMODE_MPSSE); err != nil {12                panic(err)13        }14        if err := d.SetBaudrate(9600); err != nil {15                panic(err)16        }17        if err := d.SetFlowControl(ftdi.SIO_DISABLE_FLOW_CTRL); err != nil {18                panic(err)19        }20        if err := d.SetLatencyTimer(1); err != nil {21                panic(err)22        }23        if err := d.SetTimeout(500); err != nil {24                panic(err)25        }26        if err := d.SetInterrupt(true); err != nil {27                panic(err)28        }29        buf := make([]byte, 64)30        for {31                n, err := d.Read(buf)32                if err != nil {33                        panic(err)34                }35                fmt.Printf("Read %d bytes: %v36                time.Sleep(100 * time.Millisecond)37        }38}39import (40func main() {41        d := ftdi.Device{}42        if err := d.Open(0x0403, 0x6010); err != nil {43                panic(err)44        }45        defer d.Close()46        if err := d.SetBitMode(0x00, ftdi.BITMODE_RESET); err != nil {47                panic(err)48        }49        if err := d.SetBitMode(0x00, ftdi.BITMODE_MPSSE); err != nil {50                panic(err)51        }52        if err := d.SetBaudrate(9600); err != nil {53                panic(err)54        }55        if err := d.SetFlowControl(ftdi.S

SetInterrupt

Using AI Code Generation

1import (2func main() {3	buf = make([]byte, 64)4	dev, err = ftdi.OpenFirst(0x0403, 0x6010, ftdi.ChannelAny)5	if err != nil {6		fmt.Println("Error in opening device")7	}8	defer dev.Close()9	err = dev.SetBaudrate(9600)10	if err != nil {11		fmt.Println("Error in setting baud rate")12	}13	err = dev.SetBitmode(0xff, ftdi.BitmodeReset)14	if err != nil {15		fmt.Println("Error in setting bit mode")16	}17	err = dev.SetBitmode(0xff, ftdi.BitmodeAsyncBitbang)18	if err != nil {19		fmt.Println("Error in setting bit mode")20	}21	err = dev.SetFlowControl(ftdi.FlowNone)22	if err != nil {23		fmt.Println("Error in setting flow control")24	}25	err = dev.SetLatencyTimer(16)26	if err != nil {27		fmt.Println("Error in setting latency timer")28	}29	err = dev.SetReadTimeout(1000)30	if err != nil {31		fmt.Println("Error in setting read timeout")32	}33	err = dev.SetWriteTimeout(1000)34	if err != nil {35		fmt.Println("Error in setting write timeout")36	}37	err = dev.SetEventChar(0x0d, 0)38	if err != nil {39		fmt.Println("Error in setting event char")40	}41	err = dev.SetErrorChar(0x0d, 0)42	if err != nil {43		fmt.Println("Error in setting error char")44	}45	err = dev.SetBreakOn()46	if err != nil {47		fmt.Println("Error in setting break on")48	}49	err = dev.SetBreakOff()50	if err != nil {51		fmt.Println("Error in setting break off")52	}53	err = dev.SetDtr()54	if err != nil {55		fmt.Println("Error in setting dtr")56	}57	err = dev.SetRts()58	if err != nil {59		fmt.Println("Error

SetInterrupt

Using AI Code Generation

1import (2func main() {3    config := sarama.NewConfig()4    brokers := []string{"localhost:9092"}5    producer, err := sarama.NewSyncProducer(brokers, config)6    if err != nil {7        panic(err)8    }9    defer func() {10        if err := producer.Close(); err != nil {11            panic(err)12        }13    }()14    stream, err := sarama.NewConsumer(brokers, config)15    if err != nil {16        panic(err)17    }18    defer func() {19        if err := stream.Close(); err != nil {20            panic(err)21        }22    }()23    consumer, err := stream.ConsumePartition(topic, 0, sarama.OffsetNewest)24    if err != nil {25        panic(err)26    }27    signals := make(chan os.Signal, 1)28    signal.Notify(signals, os.Interrupt)29    doneCh := make(chan struct{})30    interrupt := make(chan os.Signal, 1)31    stream.SetInterrupt(interrupt)

SetInterrupt

Using AI Code Generation

1import (2func main() {3	sig := make(chan os.Signal, 1)4	signal.Notify(sig, syscall.SIGINT, syscall.SIGTERM)5	msg := make(chan string)6	stream := NewStream()7	go stream.Read(msg)8	for {9		select {10			fmt.Println("Closing stream")11			stream.Close()12			if !ok {13				fmt.Println("Stream closed")14			}15			fmt.Println(m)16		}17	}18}19import (20type Stream struct {21	done chan struct{}22}23func NewStream() *Stream {24	return &Stream{25		done: make(chan struct{}),26	}27}28func (s *Stream) Read(msg chan<- string) {29	rand.Seed(time.Now().UnixNano())

SetInterrupt

Using AI Code Generation

1import (2func main() {3	portaudio.Initialize()4	defer portaudio.Terminate()5	stream, err := portaudio.OpenDefaultStream(1, 0, 44100, 0, nil)6	if err != nil {7		fmt.Println(err)8	}9	err = stream.Start()10	if err != nil {11		fmt.Println(err)12	}13	interrupt := make(chan os.Signal, 1)14	signal.Notify(interrupt, os.Interrupt, syscall.SIGTERM)15	input := make(chan string, 1)16	go func() {17		fmt.Scanln(&text)18	}()19	go func() {20		stream.SetInterrupt(true)21	}()22	go func() {23		stream.SetInterrupt(true)24	}()25	buffer := make([]int32, 512)26	for {27		err := stream.Read()28		if err != nil {29			fmt.Println(err)30		}31		_, err = ioutil.ReadAll(buffer)32		if err != nil {33			fmt.Println(err)34		}35	}36	err = stream.Stop()37	if err != nil {38		fmt.Println(err)39	}40	err = stream.Close()41	if err != nil {42		fmt.Println(err)43	}44}

SetInterrupt

Using AI Code Generation

1import (2func main() {3    stream := NewStream()4    stream.SetInterrupt(func() {5        fmt.Println("Interrupted")6    })7    stream.DoSomething()8}9import (10func main() {11    stream := NewStream()12    stream.SetInterrupt(func() {13        fmt.Println("Interrupted")14    })15    stream.DoSomething()16}

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.