Unlock 30% off on Manual Testing Annual Plans this Holiday Season.

Copied to Clipboard!

How to use formatError method of td Package

Best Go-testdeep code snippet using td.formatError

scan.go

Source:scan.go

1// Copyright 2012 The Go Authors. All rights reserved.2// Use of this source code is governed by a BSD-style3// license that can be found in the LICENSE file.4package jpeg5import (6	"image"7)8// makeImg allocates and initializes the destination image.9func (d *decoder) makeImg(h0, v0, mxx, myy int) {10	if d.nComp == nGrayComponent {11		m := image.NewGray(image.Rect(0, 0, 8*mxx, 8*myy))12		d.img1 = m.SubImage(image.Rect(0, 0, d.width, d.height)).(*image.Gray)13		return14	}15	var subsampleRatio image.YCbCrSubsampleRatio16	switch {17	case h0 == 1 && v0 == 1:18		subsampleRatio = image.YCbCrSubsampleRatio44419	case h0 == 1 && v0 == 2:20		subsampleRatio = image.YCbCrSubsampleRatio44021	case h0 == 2 && v0 == 1:22		subsampleRatio = image.YCbCrSubsampleRatio42223	case h0 == 2 && v0 == 2:24		subsampleRatio = image.YCbCrSubsampleRatio42025	default:26		panic("unreachable")27	}28	m := image.NewYCbCr(image.Rect(0, 0, 8*h0*mxx, 8*v0*myy), subsampleRatio)29	d.img3 = m.SubImage(image.Rect(0, 0, d.width, d.height)).(*image.YCbCr)30}31// Specified in section B.2.3.32func (d *decoder) processSOS(n int) error {33	if d.nComp == 0 {34		return FormatError("missing SOF marker")35	}36	if n < 6 || 4+2*d.nComp < n || n%2 != 0 {37		return FormatError("SOS has wrong length")38	}39	if err := d.readFull(d.tmp[:n]); err != nil {40		return err41	}42	nComp := int(d.tmp[0])43	if n != 4+2*nComp {44		return FormatError("SOS length inconsistent with number of components")45	}46	var scan [nColorComponent]struct {47		compIndex uint848		td        uint8 // DC table selector.49		ta        uint8 // AC table selector.50	}51	for i := 0; i < nComp; i++ {52		cs := d.tmp[1+2*i] // Component selector.53		compIndex := -154		for j, comp := range d.comp {55			if cs == comp.c {56				compIndex = j57			}58		}59		if compIndex < 0 {60			return FormatError("unknown component selector")61		}62		scan[i].compIndex = uint8(compIndex)63		scan[i].td = d.tmp[2+2*i] >> 464		if scan[i].td > maxTh {65			return FormatError("bad Td value")66		}67		scan[i].ta = d.tmp[2+2*i] & 0x0f68		if scan[i].ta > maxTh {69			return FormatError("bad Ta value")70		}71	}72	// zigStart and zigEnd are the spectral selection bounds.73	// ah and al are the successive approximation high and low values.74	// The spec calls these values Ss, Se, Ah and Al.75	//76	// For progressive JPEGs, these are the two more-or-less independent77	// aspects of progression. Spectral selection progression is when not78	// all of a block's 64 DCT coefficients are transmitted in one pass.79	// For example, three passes could transmit coefficient 0 (the DC80	// component), coefficients 1-5, and coefficients 6-63, in zig-zag81	// order. Successive approximation is when not all of the bits of a82	// band of coefficients are transmitted in one pass. For example,83	// three passes could transmit the 6 most significant bits, followed84	// by the second-least significant bit, followed by the least85	// significant bit.86	//87	// For baseline JPEGs, these parameters are hard-coded to 0/63/0/0.88	zigStart, zigEnd, ah, al := int32(0), int32(blockSize-1), uint32(0), uint32(0)89	if d.progressive {90		zigStart = int32(d.tmp[1+2*nComp])91		zigEnd = int32(d.tmp[2+2*nComp])92		ah = uint32(d.tmp[3+2*nComp] >> 4)93		al = uint32(d.tmp[3+2*nComp] & 0x0f)94		if (zigStart == 0 && zigEnd != 0) || zigStart > zigEnd || blockSize <= zigEnd {95			return FormatError("bad spectral selection bounds")96		}97		if zigStart != 0 && nComp != 1 {98			return FormatError("progressive AC coefficients for more than one component")99		}100		if ah != 0 && ah != al+1 {101			return FormatError("bad successive approximation values")102		}103	}104	// mxx and myy are the number of MCUs (Minimum Coded Units) in the image.105	h0, v0 := d.comp[0].h, d.comp[0].v // The h and v values from the Y components.106	mxx := (d.width + 8*h0 - 1) / (8 * h0)107	myy := (d.height + 8*v0 - 1) / (8 * v0)108	if d.img1 == nil && d.img3 == nil {109		d.makeImg(h0, v0, mxx, myy)110	}111	if d.progressive {112		for i := 0; i < nComp; i++ {113			compIndex := scan[i].compIndex114			if d.progCoeffs[compIndex] == nil {115				d.progCoeffs[compIndex] = make([]block, mxx*myy*d.comp[compIndex].h*d.comp[compIndex].v)116			}117		}118	}119	d.bits = bits{}120	mcu, expectedRST := 0, uint8(rst0Marker)121	var (122		// b is the decoded coefficients, in natural (not zig-zag) order.123		b  block124		dc [nColorComponent]int32125		// bx and by are the location of the current (in terms of 8x8 blocks).126		// For example, with 4:2:0 chroma subsampling, the block whose top left127		// pixel co-ordinates are (16, 8) is the third block in the first row:128		// bx is 2 and by is 0, even though the pixel is in the second MCU.129		bx, by     int130		blockCount int131	)132	for my := 0; my < myy; my++ {133		for mx := 0; mx < mxx; mx++ {134			for i := 0; i < nComp; i++ {135				compIndex := scan[i].compIndex136				qt := &d.quant[d.comp[compIndex].tq]137				for j := 0; j < d.comp[compIndex].h*d.comp[compIndex].v; j++ {138					// The blocks are traversed one MCU at a time. For 4:2:0 chroma139					// subsampling, there are four Y 8x8 blocks in every 16x16 MCU.140					//141					// For a baseline 32x16 pixel image, the Y blocks visiting order is:142					//	0 1 4 5143					//	2 3 6 7144					//145					// For progressive images, the interleaved scans (those with nComp > 1)146					// are traversed as above, but non-interleaved scans are traversed left147					// to right, top to bottom:148					//	0 1 2 3149					//	4 5 6 7150					// Only DC scans (zigStart == 0) can be interleaved. AC scans must have151					// only one component.152					//153					// To further complicate matters, for non-interleaved scans, there is no154					// data for any blocks that are inside the image at the MCU level but155					// outside the image at the pixel level. For example, a 24x16 pixel 4:2:0156					// progressive image consists of two 16x16 MCUs. The interleaved scans157					// will process 8 Y blocks:158					//	0 1 4 5159					//	2 3 6 7160					// The non-interleaved scans will process only 6 Y blocks:161					//	0 1 2162					//	3 4 5163					if nComp != 1 {164						bx, by = d.comp[compIndex].h*mx, d.comp[compIndex].v*my165						if h0 == 1 {166							by += j167						} else {168							bx += j % 2169							by += j / 2170						}171					} else {172						q := mxx * d.comp[compIndex].h173						bx = blockCount % q174						by = blockCount / q175						blockCount++176						if bx*8 >= d.width || by*8 >= d.height {177							continue178						}179					}180					// Load the previous partially decoded coefficients, if applicable.181					if d.progressive {182						b = d.progCoeffs[compIndex][by*mxx*d.comp[compIndex].h+bx]183					} else {184						b = block{}185					}186					if ah != 0 {187						if err := d.refine(&b, &d.huff[acTable][scan[i].ta], zigStart, zigEnd, 1<<al); err != nil {188							return err189						}190					} else {191						zig := zigStart192						if zig == 0 {193							zig++194							// Decode the DC coefficient, as specified in section F.2.2.1.195							value, err := d.decodeHuffman(&d.huff[dcTable][scan[i].td])196							if err != nil {197								return err198							}199							if value > 16 {200								return UnsupportedError("excessive DC component")201							}202							dcDelta, err := d.receiveExtend(value)203							if err != nil {204								return err205							}206							dc[compIndex] += dcDelta207							b[0] = dc[compIndex] << al208						}209						if zig <= zigEnd && d.eobRun > 0 {210							d.eobRun--211						} else {212							// Decode the AC coefficients, as specified in section F.2.2.2.213							huff := &d.huff[acTable][scan[i].ta]214							for ; zig <= zigEnd; zig++ {215								value, err := d.decodeHuffman(huff)216								if err != nil {217									return err218								}219								val0 := value >> 4220								val1 := value & 0x0f221								if val1 != 0 {222									zig += int32(val0)223									if zig > zigEnd {224										break225									}226									ac, err := d.receiveExtend(val1)227									if err != nil {228										return err229									}230									b[unzig[zig]] = ac << al231								} else {232									if val0 != 0x0f {233										d.eobRun = uint16(1 << val0)234										if val0 != 0 {235											bits, err := d.decodeBits(int32(val0))236											if err != nil {237												return err238											}239											d.eobRun |= uint16(bits)240										}241										d.eobRun--242										break243									}244									zig += 0x0f245								}246							}247						}248					}249					if d.progressive {250						if zigEnd != blockSize-1 || al != 0 {251							// We haven't completely decoded this 8x8 block. Save the coefficients.252							d.progCoeffs[compIndex][by*mxx*d.comp[compIndex].h+bx] = b253							// At this point, we could execute the rest of the loop body to dequantize and254							// perform the inverse DCT, to save early stages of a progressive image to the255							// *image.YCbCr buffers (the whole point of progressive encoding), but in Go,256							// the jpeg.Decode function does not return until the entire image is decoded,257							// so we "continue" here to avoid wasted computation.258							continue259						}260					}261					// Dequantize, perform the inverse DCT and store the block to the image.262					for zig := 0; zig < blockSize; zig++ {263						b[unzig[zig]] *= qt[zig]264					}265					idct(&b)266					dst, stride := []byte(nil), 0267					if d.nComp == nGrayComponent {268						dst, stride = d.img1.Pix[8*(by*d.img1.Stride+bx):], d.img1.Stride269					} else {270						switch compIndex {271						case 0:272							dst, stride = d.img3.Y[8*(by*d.img3.YStride+bx):], d.img3.YStride273						case 1:274							dst, stride = d.img3.Cb[8*(by*d.img3.CStride+bx):], d.img3.CStride275						case 2:276							dst, stride = d.img3.Cr[8*(by*d.img3.CStride+bx):], d.img3.CStride277						default:278							return UnsupportedError("too many components")279						}280					}281					// Level shift by +128, clip to [0, 255], and write to dst.282					for y := 0; y < 8; y++ {283						y8 := y * 8284						yStride := y * stride285						for x := 0; x < 8; x++ {286							c := b[y8+x]287							if c < -128 {288								c = 0289							} else if c > 127 {290								c = 255291							} else {292								c += 128293							}294							dst[yStride+x] = uint8(c)295						}296					}297				} // for j298			} // for i299			mcu++300			if d.ri > 0 && mcu%d.ri == 0 && mcu < mxx*myy {301				// A more sophisticated decoder could use RST[0-7] markers to resynchronize from corrupt input,302				// but this one assumes well-formed input, and hence the restart marker follows immediately.303				if err := d.readFull(d.tmp[:2]); err != nil {304					return err305				}306				if d.tmp[0] != 0xff || d.tmp[1] != expectedRST {307					return FormatError("bad RST marker")308				}309				expectedRST++310				if expectedRST == rst7Marker+1 {311					expectedRST = rst0Marker312				}313				// Reset the Huffman decoder.314				d.bits = bits{}315				// Reset the DC components, as per section F.2.1.3.1.316				dc = [nColorComponent]int32{}317				// Reset the progressive decoder state, as per section G.1.2.2.318				d.eobRun = 0319			}320		} // for mx321	} // for my322	return nil323}324// refine decodes a successive approximation refinement block, as specified in325// section G.1.2.326func (d *decoder) refine(b *block, h *huffman, zigStart, zigEnd, delta int32) error {327	// Refining a DC component is trivial.328	if zigStart == 0 {329		if zigEnd != 0 {330			panic("unreachable")331		}332		bit, err := d.decodeBit()333		if err != nil {334			return err335		}336		if bit {337			b[0] |= delta338		}339		return nil340	}341	// Refining AC components is more complicated; see sections G.1.2.2 and G.1.2.3.342	zig := zigStart343	if d.eobRun == 0 {344	loop:345		for ; zig <= zigEnd; zig++ {346			z := int32(0)347			value, err := d.decodeHuffman(h)348			if err != nil {349				return err350			}351			val0 := value >> 4352			val1 := value & 0x0f353			switch val1 {354			case 0:355				if val0 != 0x0f {356					d.eobRun = uint16(1 << val0)357					if val0 != 0 {358						bits, err := d.decodeBits(int32(val0))359						if err != nil {360							return err361						}362						d.eobRun |= uint16(bits)363					}364					break loop365				}366			case 1:367				z = delta368				bit, err := d.decodeBit()369				if err != nil {370					return err371				}372				if !bit {373					z = -z374				}375			default:376				return FormatError("unexpected Huffman code")377			}378			zig, err = d.refineNonZeroes(b, zig, zigEnd, int32(val0), delta)379			if err != nil {380				return err381			}382			if zig > zigEnd {383				return FormatError("too many coefficients")384			}385			if z != 0 {386				b[unzig[zig]] = z387			}388		}389	}390	if d.eobRun > 0 {391		d.eobRun--392		if _, err := d.refineNonZeroes(b, zig, zigEnd, -1, delta); err != nil {393			return err394		}395	}396	return nil397}398// refineNonZeroes refines non-zero entries of b in zig-zag order. If nz >= 0,399// the first nz zero entries are skipped over.400func (d *decoder) refineNonZeroes(b *block, zig, zigEnd, nz, delta int32) (int32, error) {401	for ; zig <= zigEnd; zig++ {402		u := unzig[zig]403		if b[u] == 0 {404			if nz == 0 {405				break406			}407			nz--408			continue409		}410		bit, err := d.decodeBit()411		if err != nil {412			return 0, err413		}414		if !bit {415			continue416		}417		if b[u] >= 0 {418			b[u] += delta419		} else {420			b[u] -= delta421		}422	}423	return zig, nil424}...

formatError

Using AI Code Generation

1import (2func main() {3	f, err := os.Open("test.txt")4	if err != nil {5		fmt.Println(err)6	}7	fmt.Println(f.Name(), "opened successfully")8}9type error interface {10    Error() string11}12fmt.Println(f.Name(), "opened successfully")13fmt.Println(err)14The Error() method of the *PathError type returns a string in the following format:

formatError

Using AI Code Generation

1import (2func main() {3    _, err := Sqrt(-10)4    if err != nil {5        log.Println(err)6    }7}8import (9func main() {10    _, err := Sqrt(-10)11    if err != nil {12        if err, ok := err.(*Error); ok {13            fmt.Println(err.arg)14            fmt.Println(err.msg)15        } else {16            log.Fatal(err)17        }18    }19}20import (21func main() {22    _, err := Sqrt(-10)23    if err != nil {24        if err, ok := err.(*Error); ok {25            fmt.Println(err.arg)26            fmt.Println(err.msg)27        } else {28            log.Fatal(err)29        }30    }31}32import (33func main() {34    _, err := Sqrt(-10)35    if err != nil {36        if err, ok := err.(*Error); ok {37            fmt.Println(err.arg)38            fmt.Println(err.msg)39        } else {40            log.Fatal(err)41        }42    }43}44import (45func main() {46    _, err := Sqrt(-10)47    if err != nil {48        if err, ok := err.(*Error); ok {49            fmt.Println(err.arg)50            fmt.Println(err.msg)51        } else {52            log.Fatal(err)53        }54    }55}56import (57func main() {58    _, err := Sqrt(-10)59    if err != nil {60        if err, ok := err.(*Error); ok {61            fmt.Println(err.arg)62            fmt.Println(err.msg)63        } else {64            log.Fatal(err)65        }66    }67}

formatError

Using AI Code Generation

1import (2func main() {3	_, err := os.Open("no-file.txt")4	if err != nil {5		fmt.Println("err happened", err)6		fmt.Println("err happened", err.(*os.PathError).Err)7	}8}9import (10func main() {11	_, err := os.Open("no-file.txt")12	if err != nil {13		fmt.Println("err happened", err)14		fmt.Println("err happened", err.(*os.PathError).Err.Error())15	}16}17import (18func main() {19	_, err := os.Open("no-file.txt")20	if err != nil {21		fmt.Println("err happened", err)22		fmt.Println("err happened", err.(*os.PathError).Err.Error())23		fmt.Println("err happened", err.(*os.PathError).Err.Error())24	}25}

formatError

Using AI Code Generation

1import (2type td struct {3}4func (t td) formatError() string {5    return t.Time.Format("2006-01-02")6}7func main() {8    t := td{time.Now()}9    fmt.Println(t.formatError())10}11import (12type td struct {13}14func (t td) formatError() string {15    return t.Time.Format("2006-01-02")16}17func main() {18    t := td{time.Now()}19    fmt.Println(t.formatError())20    fmt.Println(t.Time.Format("2006-01-02"))21}

formatError

Using AI Code Generation

1import (2func main() {3	err := formatError("error occurred")4	fmt.Println(err)5}6import (7func main() {8	err := formatError("error occurred")9	fmt.Println(err)10}11import (12func main() {13	err := formatError("error occurred")14	fmt.Println(err)15}

formatError

Using AI Code Generation

1import (2func main() {3	err := td.formatError("this is error")4	fmt.Println(err)5}6import (7func main() {8	err := td.formatError("this is error")9	fmt.Println(err)10}11import (12func main() {13	err := td.formatError("this is error")14	fmt.Println(err)15}16import (17func main() {18	err := td.formatError("this is error")19	fmt.Println(err)20}21import (22func main() {23	err := td.formatError("this is error")24	fmt.Println(err)25}

formatError

Using AI Code Generation

1import (2func main() {3    err := formatError("this is an error")4    fmt.Println(err)5}6func formatError(s string) error {7    return &td{s, time.Now()}8}9import (10func main() {11    err := formatError("this is an error")12    fmt.Println(err)13}14func formatError(s string) error {15    return &td{s, time.Now()}16}17import (18func main() {19    err := formatError("this is an error")20    fmt.Println(err)21}22func formatError(s string) error {23    return &td{s, time.Now()}24}25import (26func main() {27    err := formatError("this is an error")28    fmt.Println(err)29}30func formatError(s string) error {31    return &td{s, time.Now()}32}33import (34func main() {35    err := formatError("this is an error")36    fmt.Println(err)37}38func formatError(s string) error {39    return &td{s, time.Now()}40}41import (42func main() {43    err := formatError("this is an error")44    fmt.Println(err)45}46func formatError(s string) error {47    return &td{s, time.Now()}48}49import (50func main() {51    err := formatError("this is an error")52    fmt.Println(err)53}54func formatError(s string) error {55    return &td{s, time.Now()}56}

formatError

Using AI Code Generation

1import (2func (t td) Error() string {3    return fmt.Sprintf("Error in td")4}5func main() {6    err := formatError(t)7    if err != nil {8        log.Println(err)9    }10}11func formatError(err error) error {12    return fmt.Errorf("formatting error: %w", err)13}14import (15func (t td) Error() string {16    return fmt.Sprintf("Error in td")17}18func main() {19    err := formatError(t)20    if err != nil {21        if errors.Is(err, t) {22            log.Println("Error is of type td")23        } else {24            log.Println("Error is not of type td")25        }26    }27}28func formatError(err error) error {29    return fmt.Errorf("formatting error: %w", err)30}31import (32func (t td) Error() string {33    return fmt.Sprintf("Error in td")34}35func main() {36    err := formatError(t)37    if err != nil {38        if errors.As(err, &t) {39            log.Println("Error is of type td")40        } else {41            log.Println("Error is not of type td")42        }43    }44}45func formatError(err error) error {46    return fmt.Errorf("formatting error: %w", err)47}48import (49func (t td) Error() string {

formatError

Using AI Code Generation

1import (2func main() {3	td := td{407, "Permission Denied"}4	err := td.formatError()5	if err != nil {6		fmt.Println(err)7	}8}9import (10type td struct {11}12func (td *td) formatError() error {13	s := fmt.Sprintf("code: %d, message: %s", td.code, td.message)14	return errors.New(s)15}16import (17func main() {18	td := td{407, "Permission Denied"}19	err := td.formatError()20	if err != nil {21		fmt.Println(err)22	}23}24import (25type td struct {26}27func (td *td) formatError() error {28	s := fmt.Sprintf("code: %d, message: %s", td.code, td.message)29	return errors.New(s)30}31import (32func main() {33	td := td{407, "Permission Denied"}34	err := td.formatError()35	if err != nil {36		fmt.Println(err)37	}38}39import (40type td struct {

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.