Unlock 30% off on Manual Testing Annual Plans this Holiday Season.

Copied to Clipboard!

How to use after_each method of NSpec.Tests.WhenRunningSpecs.SpecClass class

Best NSpec code snippet using NSpec.Tests.WhenRunningSpecs.SpecClass.after_each

describe_method_level_afters.cs

Source:describe_method_level_afters.cs

...14            public static Action ContextLevelAfter = () => { };15            public static Action SubContextAfter = () => { };16            public static Func<Task> AsyncSubContextAfter = async () => { await Task.Delay(0); };17            // method- (or class-) level after18            void after_each()19            {20            }21            void method_level_context()22            {23                after = ContextLevelAfter;24                context["sub context"] = () =>25                {26                    after = SubContextAfter;27                    it["needs an example or it gets filtered"] = todo;28                };29                context["sub context with async after"] = () =>30                {31                    afterAsync = AsyncSubContextAfter;32                    it["needs another example or it gets filtered"] = todo;33                };34            }35        }36        [SetUp]37        public void setup()38        {39            Run(typeof(SpecClass));40        }41        [Test]42        public void it_should_set_method_level_after()43        {44            // Could not find a way to actually verify that deep inside45            // 'AfterInstance' there is a reference to 'SpecClass.after_each()'46            classContext.AfterInstance.Should().NotBeNull();47        }48        [Test]49        [Category("Async")]50        public void it_should_not_set_async_method_level_after()51        {52            classContext.AfterInstanceAsync.Should().BeNull();53        }54        [Test]55        public void it_should_set_after_on_method_level_context()56        {57            methodContext.After.Should().Be(SpecClass.ContextLevelAfter);58        }59        [Test]...

async_before_and_after.cs

Source:async_before_and_after.cs

...14            {15                beforeAllAsync = async () => await Task.Run(() => sequence = "A");16                beforeAsync = async () => await Task.Run(() => sequence += "B");17                itAsync["spec 1"] = async () => await Task.Run(() => sequence += "1");18                itAsync["spec 2"] = async () => await Task.Run(() => sequence += "2"); //two specs cause before_each and after_each to run twice19                afterAsync = async () => await Task.Run(() => sequence += "C");20                afterAllAsync = async () => await Task.Run(() => sequence += "D");21            }22        }23        [Test]24        public void everything_async_runs_in_the_correct_order_and_with_the_correct_frequency()25        {26            Run(typeof(SpecClass));27            SpecClass.sequence.Should().Be("AB1CB2CD");28        }29    }30    [TestFixture]31    [Category("RunningSpecs")]32    [Category("Async")]33    public class async_before_and_after_aliases : when_running_specs34    {35        class SpecClass : sequence_spec36        {37            void as_long_as_the_async_world_has_not_come_to_an_end()38            {39                beforeAllAsync = async () => await Task.Run(() => sequence = "A");40                beforeEachAsync = async () => await Task.Run(() => sequence += "B");41                itAsync["spec 1"] = async () => await Task.Run(() => sequence += "1");42                itAsync["spec 2"] = async () => await Task.Run(() => sequence += "2"); //two specs cause before_each and after_each to run twice43                afterEachAsync = async () => await Task.Run(() => sequence += "C");44                afterAllAsync = async () => await Task.Run(() => sequence += "D");45            }46        }47        [Test]48        public void everything_async_runs_in_the_correct_order_and_with_the_correct_frequency()49        {50            Run(typeof(SpecClass));51            SpecClass.sequence.Should().Be("AB1CB2CD");52        }53    }54}...

before_and_after.cs

Source:before_and_after.cs

...13            {14                beforeAll = () => sequence = "A";15                before = () => sequence += "B";16                it["spec 1"] = () => sequence += "1";17                it["spec 2"] = () => sequence += "2"; //two specs cause before_each and after_each to run twice18                after = () => sequence += "C";19                afterAll = () => sequence += "D";20            }21        }22        [Test]23        public void everything_runs_in_the_correct_order_and_with_the_correct_frequency()24        {25            Run(typeof(SpecClass));26            SpecClass.sequence.Should().Be("AB1CB2CD");27        }28    }29    [TestFixture]30    [Category("RunningSpecs")]31    public class before_and_after_aliases : when_running_specs32    {33        class SpecClass : sequence_spec34        {35            void as_long_as_the_world_has_not_come_to_an_end()36            {37                beforeAll = () => sequence = "A";38                beforeEach = () => sequence += "B";39                it["spec 1"] = () => sequence += "1";40                it["spec 2"] = () => sequence += "2"; //two specs cause before_each and after_each to run twice41                afterEach = () => sequence += "C";42                afterAll = () => sequence += "D";43            }44        }45        [Test]46        public void everything_runs_in_the_correct_order_and_with_the_correct_frequency()47        {48            Run(typeof(SpecClass));49            SpecClass.sequence.Should().Be("AB1CB2CD");50        }51    }52}...

async_class_levels_and_context_methods.cs

Source:async_class_levels_and_context_methods.cs

...25                specify = () => Assert.That(true, Is.True);26                afterAsync = async () => await Task.Run(() => sequence += "E");27                afterAllAsync = async () => await Task.Run(() => sequence += "G");28            }29            async Task after_each()30            {31                await Task.Run(() => sequence += "F");32            }33            async Task after_all()34            {35                await Task.Run(() => sequence += "H");36            }37        }38        [SetUp]39        public void setup()40        {41            Run(typeof(SpecClass));42        }43        [Test]44        public void before_alls_at_every_level_run_before_before_eaches_from_the_outside_in()45        {46            SpecClass.sequence.Should().StartWith("ABCD");47        }48        [Test]49        public void after_alls_at_every_level_run_after_after_eaches_from_the_inside_out()50        {51            SpecClass.sequence.Should().EndWith("EFGH");52        }53    }54}...

class_levels_and_context_methods.cs

Source:class_levels_and_context_methods.cs

...23                specify = () => Assert.That(true, Is.True);24                after = () => sequence += "E";25                afterAll = () => sequence += "G";26            }27            void after_each()28            {29                sequence += "F";30            }31            void after_all()32            {33                sequence += "H";34            }35        }36        [SetUp]37        public void setup()38        {39            Run(typeof(SpecClass));40        }41        [Test]42        public void before_alls_at_every_level_run_before_before_eaches_from_the_outside_in()43        {44            SpecClass.sequence.Should().StartWith("ABCD");45        }46        [Test]47        public void after_alls_at_every_level_run_after_after_eaches_from_the_inside_out()48        {49            SpecClass.sequence.Should().EndWith("EFGH");50        }51    }52}...

describe_async_method_level_after.cs

Source:describe_async_method_level_after.cs

...12            void it_should_have_initial_value()13            {14                ShouldHaveInitialState();15            }16            async Task after_each()17            {18                await SetStateAsync();19            }20        }21        [Test]22        public void async_method_level_after_waits_for_task_to_complete()23        {24            Run(typeof(SpecClass));25            ExampleRunsWithExpectedState("it should have initial value");26        }27        class WrongSpecClass : BaseSpecClass28        {29            void it_should_not_know_what_to_do()30            {31                Assert.That(true, Is.True);32            }33            void after_each()34            {35                SetAnotherState();36            }37            async Task after_each_async()38            {39                await SetStateAsync();40            }41        }42        [Test]43        public void class_with_both_sync_and_async_after_always_fails()44        {45            Run(typeof(WrongSpecClass));46            ExampleRunsWithInnerAsyncMismatchException("it should not know what to do");47        }48    }49}...

async_class_levels.cs

Source:async_class_levels.cs

...23                await Task.Run(() => sequence += "1");24            }25            async Task it_two_is_two()26            {27                await Task.Run(() => sequence += "2"); //two specs cause before_each and after_each to run twice28            }29            async Task after_each()30            {31                await Task.Run(() => sequence += "C");32            }33            async Task after_all()34            {35                await Task.Run(() => sequence += "D");36            }37        }38        [Test]39        public void everything_runs_in_the_correct_order()40        {41            Run(typeof(SpecClass));42            SpecClass.sequence.Should().Be("AB1CB2CD");43        }...

class_levels.cs

Source:class_levels.cs

...21                sequence += "1";22            }23            void it_two_is_two()24            {25                sequence += "2"; //two specs cause before_each and after_each to run twice26            }27            void after_each()28            {29                sequence += "C";30            }31            void after_all()32            {33                sequence += "D";34            }35        }36        [Test]37        public void everything_runs_in_the_correct_order()38        {39            Run(typeof(SpecClass));40            SpecClass.sequence.Should().Be("AB1CB2CD");41        }...

after_each

Using AI Code Generation

1using System;2using System.Collections.Generic;3using System.Linq;4using System.Text;5using System.Threading.Tasks;6using NSpec;7using System.Diagnostics;8{9    {10        void method_level_context()11        {12            before = () =>13            {14                Trace.WriteLine("before");15            };16            after = () =>17            {18                Trace.WriteLine("after");19            };20            it["should run this example"] = () =>21            {22                Trace.WriteLine("it");23            };24            context["nested context"] = () =>25            {26                before = () =>27                {28                    Trace.WriteLine("before nested");29                };30                after = () =>31                {32                    Trace.WriteLine("after nested");33                };34                it["should run this example too"] = () =>35                {36                    Trace.WriteLine("it nested");37                };38            };39        }40    }41}42using System;43using System.Collections.Generic;44using System.Linq;45using System.Text;46using System.Threading.Tasks;47using NSpec;48using System.Diagnostics;49{50    {51        void method_level_context()52        {53            before = () =>54            {55                Trace.WriteLine("before");56            };57            after = () =>58            {59                Trace.WriteLine("after");60            };61            afterAll = () =>62            {63                Trace.WriteLine("afterAll");64            };65            it["should run this example"] = () =>66            {67                Trace.WriteLine("it");68            };69            context["nested context"] = () =>70            {71                before = () =>72                {73                    Trace.WriteLine("before nested");74                };75                after = () =>76                {77                    Trace.WriteLine("after nested");78                };79                it["should run this example too"] = () =>80                {81                    Trace.WriteLine("it nested");82                };83            };84        }85    }86}87using System;88using System.Collections.Generic;89using System.Linq;90using System.Text;91using System.Threading.Tasks;92using NSpec;93using System.Diagnostics;94{

after_each

Using AI Code Generation

1using System;2using System.IO;3using System.Reflection;4using System.Text;5using System.Text.RegularExpressions;6using System.Collections.Generic;7using System.Linq;8using NSpec;9using NSpec.Domain;10using NSpec.Domain.Formatters;11using NSpec.Domain.Formatters.Html;12using NSpec.Domain.Formatters.NUnit;13using NSpec.Domain.Formatters.PrecompiledViews;14{15    {16        static void Main()17        {18            new SpecClass().after_each();19        }20    }21}22using System;23using System.IO;24using System.Reflection;25using System.Text;26using System.Text.RegularExpressions;27using System.Collections.Generic;28using System.Linq;29using NSpec;30using NSpec.Domain;31using NSpec.Domain.Formatters;32using NSpec.Domain.Formatters.Html;33using NSpec.Domain.Formatters.NUnit;34using NSpec.Domain.Formatters.PrecompiledViews;35{36    {37        static void Main()38        {39            new SpecClass().before_each();40        }41    }42}43using System;44using System.IO;45using System.Reflection;46using System.Text;47using System.Text.RegularExpressions;48using System.Collections.Generic;49using System.Linq;50using NSpec;51using NSpec.Domain;52using NSpec.Domain.Formatters;53using NSpec.Domain.Formatters.Html;54using NSpec.Domain.Formatters.NUnit;55using NSpec.Domain.Formatters.PrecompiledViews;56{57    {58        static void Main()59        {60            new SpecClass().context();61        }62    }63}64using System;

after_each

Using AI Code Generation

1using NSpec;2using NSpec.Tests;3{4    void when_after_each_is_used()5    {6        it["is run after each example"] = () => { };7        it["is run after each example"] = () => { };8    }9    void after_each()10    {11        Console.WriteLine("after_each");12    }13}14using NSpec;15using NSpec.Tests;16{17    void before_each()18    {19        Console.WriteLine("before_each");20    }21    void after_each()22    {23        Console.WriteLine("after_each");24    }25    void when_before_and_after_each_are_used()26    {27        it["is run before each example"] = () => { };28        it["is run before each example"] = () => { };29    }30}31using NSpec;32using NSpec.Tests;33{34    void before_all()35    {36        Console.WriteLine("before_all");37    }38    void after_all()39    {40        Console.WriteLine("after_all");41    }42    void when_before_and_after_all_are_used()43    {44        it["is run before all examples"] = () => { };45        it["is run before all examples"] = () => { };46    }47}

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.